Specs:



 
Power Output @ 4 Ohm: 450 Watts x 1 Channel
Power Output @ 2 Ohm: 600 Watts x 1 Channel

THD @ Rated Power: 0.1%
THD @ 20% of Rated Power: 0.02%

Signal to Noise Ratio @ 1 Watt: 80dB
Signal to Noise Ratio @ Rated Power: 108dB

Frequency Response (=/- 1dB): 10 Hz - 400 Hz

Damping Factor @ 4 Ohm: >600

Input Type: Differential
Input Sensitivity (Line Level Inputs): 0.5 Vp - 10 Vp
Maximum Input Voltage (Speaker Level Inputs): 30 Vp
Input Impedance (Line Level Inputs): 10 kOhm
Input Impedance (Speaker Level Inputs): 1.2 kOhm

Turn On Modes: Signal Sense, 6 V Offset Detect, Remote Turn On
Signal Sensing Turn On Threshold (Line Level Inputs): 45 mVp
Signal Sensing Turn On Threshold (Speaker Level Inputs): 800 mVp

Crossover Filter Slope: 12 dB/Oct
Crossover Filter Type: Bandpass, Highpass, None
Crossover Frequency Ranges: HP: 5 Hz - 40 Hz; LP: 50 Hz - 500 Hz

Phase Control: 0° - 180°
Bass Boost @ 45 Hz: 0 - 15dB

Quiescent Current Draw: 0.9 A
Maximum Current Draw: 60 A
Required Power Line Fuse: 60 A

Dimensions (mm): 210 x 126 x 32
Dimensions (inches): 8-17/64 x 4-61/64 x 1-17/64

AF-RLC Remote Level Control (Sold Separately):

The AF-RLC remote level control is compatible with the A600.1D amplifier. The RLC is connected to the amplifier using an attached RJ-15 phone cord. When attached, the RLC will allow the user to vary the level of the subwoofer amplifier between the level setting on the control panel and infinite attenuation.

One RLC can control more than one A600.1D amplifier and through a unique feature called RLC-Sync, the level of all of the connected amplifiers will be synchronized (within about 1dB) with the amplifier that has the lowest control panel level setting.